12
• If the sample number is correct, the samples starting from the
selected one to the last sample of the lot will be printed. To stop
printing before the last sample is reached, press and hold down
the
ALT
and
PAPER
keys until the printer stops.
• The Sample ID will be printed for each sample of Lot 00, and
once per lot for Lot 01 to Lot 16.
• During printout, the LCD will display the sample number that is
being printed at that moment. If printout is stopped the LCD will
show the last printed sample number. It is then possible to select
another sample.
• Press
ALT
and
FNC
to return to setup mode.
Viewing logged data
• Press
TEMP/TIME
to view data of the selected sample. Data will
be displayed in the following order:
Sample ID - for Lot 00 only
temperature value
date
time
• If
TEMP/TIME
is pressed when the time is displayed, the LCD will
pass to the next sample number.
• It is then possible to scroll the data of the next sample by
pressing
TEMP/TIME
or select a different sample using the
Arrow
keys.
• to return to setup mode, press
ALT
and
FNC
when the meter
displays the sample number.
Cod. 02 - Lot summary printout
• Select the code 02.
• The message "Lot table Printing" will scroll twice across LCD.
• The meter will then print a complete set of information based on
the data stored in memory:
a - lot number
b - logging interval
c - Sample ID
d - starting date
e - number of samples
f - starting time
Note:
For lot 00, only the number
of samples will be printed.
S.0031
17.22
19/12/2004
#02
15 m
S.0007
15.40
19/12/2004
#01
30 m
#00
S.013
ID 2*3 9*4 3 6
ID - - - - - -
