10
• Handle instrument carefully. Do not drop.
• Do not immerse instrument under water.
• Do not spray water to any part of instrument except the “sample well”
located over the prism.
• The instrument is intended to measure ethylene glycol solutions. Do
not expose instrument or prism to solvents that will damage it. This
includes most organic solvents and extremely hot or cold solutions.
• Particulate matter in a sample may scratch the prism. Absorb sample
with a soft tissue and rinse sample well with deionized or distilled
water between samples.
• Use plastic pipettes to transfer all solutions. Do not use metallic tools
such as needles, spoons or tweezers as these will scratch the prism.
• Cover sample well with hand if measuring in direct sun.
MEASUREMENT GUIDELINES
1. Battery (blinks when low battery condition detected)
2. Primary Display (displays measurement and error messages)
3. Measurement in Progress Tag
4. SETUP: Factory Calibration Tag
5. CAL: Calibration Tag
6. Measurement Unit
7. Automatic Temperature Compensation
(blinks when temperature exceeds 0.0‑40.0 °C / 32.0‑104.0 °F range)
8. Temperature Units
9. Secondary Display (displays temperature measurements; when
blinking, temperature has exceeded operation range: 0.0‑80.0 °C /
32.0‑176.0 °F)
DISPLA
Y ELEMENTS
