23
22
CE DECLARATION OF CONFORMITY
Recommendations for Users
Before using this product, make sure that it is entirely suitable for the environment
in which it is used.
Operation of this instrument in residential area could cause unacceptable
interferences to radio and TV equipments, requiring the operator to take all
necessary steps to correct interferences.
Any variation introduced by the user to the supplied equipment may degrade
the instrument's EMC performance.
To avoid electrical shock, do not use this instrument when voltages at the
measurement surface exceed 24 Vac or 60 Vdc.
To avoid damages or burns, do not perform any measurement in microwave
ovens.
Hanna Instruments reserves the right to
modify the design, construction and appear-
ance of its products without advance notice.
WARRANTY
All Hanna Instruments meters are warranted for two
years against defects in workmanship and materials
when used for their intended purpose and maintained
according to instructions. This warranty is limited to repair
or replacement free of charge. Damages due to acci-
dents, misuse, tampering or lack of prescribed mainte-
nance are not covered. If service is required, contact the
dealer from whom you purchased the instrument. If under
warranty, report the model number, date of purchase,
serial number and the nature of the failure.
First obtain a Returned Goods Authorization number from
the Customer Service department, then return the instru-
ment with the Authorization # included along with ship-
ment costs prepaid. If the repair is not covered by the
warranty, you will be notified of the charges. When
shipping any instrument, make sure it is properly pack-
aged for complete protection.
All rights are reserved. Reproduction in whole or in
part is prohibited without the written consent of the
copyright owner.
ACCESSORIES
HI 731318
Tissue for wiping cuvets (4 pcs)
HI 731321
Spare glass cuvet (4 pcs)
HI 731313
Maintenance kit: rugged
carrying case including HI
93703-0 and HI 93703-10
calibration solutions, HI 93703-
50 cuvet cleaning solution, 1
tissue for wiping cuvets and 2
cuvets
HI 93703-0
AMCO-AEPA-1 @0 FTU*
calibration solution, 30 mL
HI 93703-05
AMCO-AEPA-1 @500 FTU*
calibration solution, 30 mL
HI 93703-10
AMCO-AEPA-1 @10 FTU*
calibration solution, 30 mL
HI 93703-50
Cuvet cleaning solution, 230
mL
* 1 FTU = 1 NTU