Hanna Instruments HI 931100 Instruction Manual Download Page 19

37

37

HI 710031

Rugged carrying case

HI 721308

1.5V AA alkaline battery (10
pcs)

HI 7662

Temperature probe with 1 m
(3.3') cable

HI  76405

Electrode holder

MANNACLR1

Instruction manual

mannacl_r1.P65

38

38

All Hanna Instruments meters are warranted
for two years 
against defects in workmanship
and materials when used for their intended
purpose and maintained according to instruc-
tions.

The electrodes and the probes are war-
ranted for a period of six months.

This warranty is limited to repair or replacement
free of charge.

Damages due to accident, misuse, tampering
or lack of prescribed maintenance are not cov-
ered.

If service is required, contact the dealer from
whom you purchased the instrument. If under
warranty, report the model number, date of
purchase, serial number and the nature of the
failure. If the repair is not covered by the war-
ranty, you will be notified of the charges in-
curred. If the instrument is to be returned to
Hanna Instruments, first obtain a Returned Goods
Authorization Number from the Customer Ser-
vice department and then send it with shipment
costs prepaid. When shipping any instrument,
make sure it is properly packaged for complete
protection.

To validate your warranty, fill out and return the
enclosed warranty card within 14 days from the
date of purchase.

All rights are reserved. Reproduction in whole or
in part is prohibited without the written consent
of the copyright owner.

Hanna Instruments reserves the right to
modify the design, construction and
appearance of its products without advance
notice.

WARRANTY

Summary of Contents for HI 931100





















Reviews: