manualshive.com logo in svg

Hanna Instruments HI 9146, Instruction Manual, Page: 22 / 28

Share
Download
Hanna Instruments HI 9146 Instruction Manual Download Page 22

22

TAGS & SYMBOLS

•

Mode tags

 light up for indicating the corresponding active mode,

and blink for warning the user.

MEASURE on

: Instrument in measurement mode.

SETUP on

: SETUP menu mode has been entered.

CALIBRATION on

: calibration mode has been entered.

GLP on

: GLP mode has been entered.

•

Reading in HOLD

:

HOLD on

: reading frozen in AutoEnd mode.

HOLD blinking

: reading unstable in AutoEnd mode.

•

“°C” or “°F” blinking

: temperature is out of range.

•

 blinking (while in calibration)

: reading unstable.

•

Main active key messages

 light up for indicating the corresponding

active key.

CAL on

: CAL key available.

CFM blinking

: ask confirmation of calibration or set value.

SETUP on

: SETUP key available.

GLP on

: GLP key available.

RANGE on

: RANGE key available.

•

Battery symbol blinking

: low battery condition. The batteries

should be replaced soon.

LCD MESSAGE GUIDE

LCD MESSAGE GUIDE

LCD MESSAGE GUIDE

LCD MESSAGE GUIDE

LCD MESSAGE GUIDE

Summary of Contents for HI 9146





























Reviews:

No comments