Hanna Instruments HI 8564, Instruction Manual

Page: 8 / 9

14 15
CE DECLARATION OF CONFORMITY
Recommendations for Users
Before using these products, make sure that they are entirely
suitable for the environment in which they are used.
Operation of these instruments in residential area could cause
unacceptable interferences to radio and TV equipments, requiring
the operator to take all necessary steps to correct interferences.
In HI 8564 the trimmers are sensitive to electrostatic discharge.
It is recommended to use an antistatic screwdriver during calibra-
tion.
Any variation introduced by the user to the supplied equipment
may degrade the instrument's EMC performance.
To avoid electrical shock, do not use these instruments when
voltages at the measurement surface exceed 24 Vac or 60 Vdc.
To avoid damages or burns, do not perform any measurement in
microwave ovens.
ACCESSORIES
HI 70601/2 RH probe for HI 8564 with built-
in temperature sensor and 2 m
(6.6') cable
HI 70601/5 RH probe for HI 8564 with built-
in temperature sensor and 5 m
(16.5') cable
HI 710001 Soft carrying case for HI 8564
HI 710007 Blue shockproof rubber boot
for HI 93640
HI 710008 Orange shockproof rubber boot
for HI 93640
HI 710009 Blue shockproof rubber boot
for HI 8564
HI 710010 Orange shockproof rubber boot
for HI 8564
HI 710011 Probe sintered cap for HI 93640
HI 710031 Rugged carrying case
HI 7101 RH calibration chamber for
HI 8564
HI 7102 RH calibration chamber for
HI 93640
HI 7111/P Spare saturation LiCl salts for
low humidity calibration (15 g,
6 pcs)
HI 7121/P Spare saturation NaCl salts for
high range humidity calibration
(33 g, 6 pcs)
Hanna Instruments reserves the right to
modify the design, construction and appear-
ance of its products without advance notice.