background image

Instruction Manual

HI 8424NEW

Portable pH/mV/°C Meter

with Automatic Calibration and

Battery Recharging System

www.hannainst.com

Australia:

Tel. (03) 9769.0666 • Fax (03) 9769.0699

China:

Tel. (10) 88570068 • Fax (10) 88570060

Egypt:

Tel. & Fax (02) 2758.683

Germany:

Tel. (07851) 9129-0 • Fax (07851) 9129-99

Greece:

Tel. (210) 823.5192 • Fax (210) 884.0210

Indonesia:

Tel. (21) 4584.2941 • Fax (21) 4584.2942

Japan:

Tel. (03) 3258.9565 • Fax (03) 3258.9567

Korea:

Tel. (02) 2278.5147 • Fax (02) 2264.1729

Malaysia:

Tel. (603) 5638.9940 • Fax (603) 5638.9829

Singapore:

Tel. 6296.7118 • Fax 6291.6906

South Africa:

Tel. (011) 615.6076 • Fax (011) 615.8582

Taiwan:

Tel. 886.2.2739.3014 • Fax 886.2.2739.2983

Thailand:

Tel. (662) 619.0708.11 • Fax (662) 619.0061

United Kingdom:

Tel. (01525) 850.855 • Fax (01525) 853.668

USA:

Tel. (401) 765.7500 • Fax (401) 765.7575

For e-mail contacts and a complete list of Sales and Technical

offices, please see 

www.hannainst.com

.

MAN8424W R1      10/05

SALES & TECHNICAL SERVICE CONTACTS

SALES & TECHNICAL SERVICE CONTACTS

SALES & TECHNICAL SERVICE CONTACTS

SALES & TECHNICAL SERVICE CONTACTS

SALES & TECHNICAL SERVICE CONTACTS

Summary of Contents for HI 8424NEW















Reviews: