10
11
ACCESSORIES
HI 151-00
Electronic thermometer (°C)
HI 151-01
Electronic thermometer (°F)
HI 740216
Test tube cooling rack (25 tube capacity)
HI 740217
Laboratory bench safety shield
MAINTENANCE
The reactor should be kept clean and any reagent spills should be wiped up immediately.
Do not touch the heater block unless you are certain it has cooled.
If some reagent accidentally spills into the heater block, disconnect power and allow the reactor to cool; then
remove all tubes and clean the block.
Should overheating occur, the reactor automatically shuts down, and all LED indicators turn off. Contact your
dealer or your nearest Hanna Service Center for maintenance.
FUSE REPLACEMENT
Replace fuse only with fuse of specified type and current rating.
• Turn the reactor off and disconnect the power supply.
• Unscrew the fuse holder by rotating it counterclockwise.
• Replace the fuse with one 4A fuse for -01 or one 2A fuse for -02 model.
• Replace the fuse holder before turning the reactor on.
HI 839800
is warranted for two years against defects in workmanship and materials when used for its
intended purpose and maintained according to the instructions.
This warranty is limited to repair or replacement free of charge.
Damages due to accident, misuse, tampering or lack of prescribed maintenance are not covered.
If service is required, contact your dealer. If under warranty, report the model number, date of purchase,
serial number and the nature of the failure. If the repair is not covered by the warranty, you will be
notified of the charges incurred.
If the instrument is to be returned to Hanna Instruments, first obtain a Returned Goods Authorization
Number from the Customer Service Department and then send it with shipment costs prepaid. When
shipping any instrument, make sure it is properly packaged for complete protection.
To validate your warranty, fill out and return the enclosed warranty card within 14 days from the date of purchase.
WARRANTY
Recommendations for Users
Before using these products, make sure that they are entirely suitable for your specific application and for the environment in
which they are used.
Operation of these instruments may cause unacceptable interferences to other electronic equipments, this requiring the operator
to take all necessary steps to correct interferences.
Any variation introduced by the user to the supplied equipment may degrade the instruments' EMC performance.
To avoid damages or burns, do not put the instrument in microwave oven. Do not use or store the instrument in hazardous
environments.
Hanna Instruments reserves the right to modify the design, construction and appearance of its products
without advance notice.
