16
• The pH calibration slope (the GLP slope is the average of the calibration
slopes; the percentage is referred to the ideal value of 59.16 mV/pH).
• The pH calibration buffers in calibrating order.
The first pH calibration buffer:
The second pH calibration buffer:
The third pH calibration buffer:
Note:
•
The “OLd” message displayed beside the pH value means that
this buffer was not used during last calibration. Press and hold
down
SET/CLR
if you want to see calibration date (or time if old
calibration was made in the same day with current calibration).
•
If “no bUF” message appears on the LCD, the instruments inform
you that calibration was performed in less than three points.
• pH resolution during calibration.
• Calibration Alarm Time-Out status:
if disabled.
CAL
pH
BUF
CAL
pH
BUF
%
CAL
CAL
BUF
CAL
CAL
pH
BUF