Checktemp 4
is an easy-to-use thermometer, offering quick and precise measurements.
Checktemp 4
is the ideal solution for food applications. The sharp stainless steel probe
is specially designed for penetration of cooked as well as on semi-frozen food. In
addition, the probe nestles in the casing to make the thermometers truly portable.
TAKING MEASUREMENTS
• Turn the meter on by simply opening the probe.
• Introduce the probe in the sample. For ideal measurement an immersion level of 4
cm (11/2’’) is recommended. Wait for a few seconds for the reading to stabilize and
for the temperature value be displayed on the LCD.
• After 8 minutes, the meter switches itself off. To restart, close and open the probe
again.
• Turn the meter off by closing the probe and returning it to its original position.
Note:
Clean the probe after use and before storing it.
CE DECLARATION OF CONFORMITY
Recommendations for Users
Before using these products, make sure that they are
entirely suitable for the environment in which they are
used. Operation of these instruments in residential ar-
eas could cause unacceptable interferences to radio and
TV equipment. Any variation introduced by the user to
the supplied equipment may degrade the instrument’s
EMC performance. To avoid electrical shock, do not use
these instruments when voltages at the measurement
surface exceed 24 VAC or 60 VDC. To avoid damages or
burns, do not perform any measurement in microwave
ovens.
“Err” warning message, variations in readings or fading display can indicate a low
battery level. Remove the cover of the battery compartment on the back side and
replace the 1.5V AA battery while paying attention to its polarity.
BATTERY REPLACEMENT
