Hanna Instruments Gro Line HALO 2 Instruction Manual Download Page 10

10

CE

rT

iF

iCA

Ti

ON

MAN9810302 05/21

CERTIFICATION

All Hanna Instruments conform to the 

CE European Directives.

Disposal of Electrical and Electronic Equipment. 

The product should not be treated as household waste. 

Instead, hand it over to the appropriate collection point for the recycling of electrical and electronic equipment, 

which will conserve natural resources.

Disposal of waste batteries.

 This product contains batteries, do not dispose of them with other household 

waste. Hand them over to the appropriate collection point for recycling. Ensuring proper product and battery 

disposal prevents potential negative consequences for the environment and human health. For more information, 

contact your city, your local household waste disposal service, or the place of purchase.

RECOMMENDATIONS FOR USERS

Before using this product, make sure it is entirely suitable for your specific application and for the environment in which it is 

used. Any variation introduced by the user to the supplied equipment may degrade the tester’s performance. For your and the 

tester’s safety do not use or store it in hazardous environments.

WARRANTY

HI9810302

 is warranted for a period of one year against defects in workmanship and materials when used for its intended 

purpose and maintained according to instructions. This warranty is limited to repair or replacement free of charge. Damage 

due to accidents, misuse, tampering, or lack of prescribed maintenance is not covered. If service is required, contact your local 

Hanna Instruments office. If under warranty, report the model number, date of purchase, serial number, and the nature of the 

problem. If the repair is not covered by the warranty, you will be notified of the charges incurred. If the tester is to be returned 

to Hanna Instruments, first obtain a Returned Goods Authorization (RGA) number from the Technical Service department and 

then send it with shipping costs prepaid. When shipping any product, make sure it is properly packaged for complete protection.

Ordering Information Product Description

Electrode Cleaning Solution

HI70061G

GroLine general purpose cleaning solution, 20 mL sachet (25 pcs.)

HI700661P

General purpose cleaning solution for agriculture, 20 mL sachet (25 pcs.)

HI700663P

Cleaning solution for soil deposits, 20 mL sachet (25 pcs.)

HI700664P

Cleaning solution for humus deposits, 20 mL sachet (25 pcs.)

Electrode Storage Solution

HI70300G

GroLine electrode storage solution, 20 mL sachet (25 pcs.)

HI70300-023

GroLine electrode storage solution, 230 mL

Electrode Fill Solution

HI9071

Gelled bridge electrolyte, 13 mL dropper bottle

Other Accessories

HI7051M

Soil preparation solution, 230 mL

HI721319

Soil auger

Summary of Contents for Gro Line HALO 2













Reviews: