OPERATION:
• Remove the protective cap.
• Turn the DiST
DiST
DiST
DiST
DiST on.
• Immerse it in the solution to be tested without
exceeding the maximum immersion level.
• Stir gently and wait for the reading
to stabilize.
DiST
DiST
DiST
DiST
DiST automatically compensates for
temperature variations.
• The reading on display is directly expressed in:
ppm (mg/L) unit for DiST1
DiST1
DiST1
DiST1
DiST1 (
HI98300
HI98300
HI98300
HI98300
HI98300 & HI98301
HI98301
HI98301
HI98301
HI98301
),
ppt (g/L) unit for DiST2
DiST2
DiST2
DiST2
DiST2 (HI98302
HI98302
HI98302
HI98302
HI98302),
µS/cm for DiST3
DiST3
DiST3
DiST3
DiST3 (HI98303
HI98303
HI98303
HI98303
HI98303) and
mS/cm for DiST4
DiST4
DiST4
DiST4
DiST4 (HI98304
HI98304
HI98304
HI98304
HI98304).
CALIBRATION:
• Immerse the DiST
DiST
DiST
DiST
DiST in the indicated calibration
solution (see Specifications), without exceeding
the maximum immersion level.
• Allow the reading to stabilize and with a small
screwdriver turn the calibration trimmer until the
display shows the required solution value.
E.g. for calibrating HI98301
HI98301
HI98301
HI98301
HI98301 the correct calibra-
tion solution is HI70032
HI70032
HI70032
HI70032
HI70032, and the trimmer should
be turned until the display shows "
1382
".
BEPS AND BATTERY REPLACEMENT:
DiST
DiST
DiST
DiST
DiST is supplied with BEPS (Battery Error Preventing
System) which avoids any erroneous reading due to
low batteries level, by switching the meter off.
To replace the batteries, slide off the battery com-
partment cover and replace all four 1.5V batteries
while paying attention to their polarity.
Batteries should only be replaced in a nonhazardous
area using the battery type specified in this instruction
sheet.
DiST
HI98300/1/2/3/4
with Automatic Temperature
Compensation
Manufacturers since 1978
Visit our Internet Home Page:
http://www.hannainst.com
ACCESSORIES:
HI 70030P
12880 µS/cm calibration kit
(25 x 20 mL sachets)
HI 70031P
1413 µS/cm calibration kit
(25 x 20 mL sachets)
HI 70032P
1382 ppm (mg/L) calibration kit
(25 x 20 mL sachets)
HI 70038P
6.44 ppt (g/L) calibration kit
(25 x 20 mL sachets)
HI 70039P
5000 µS/cm calibration kit
(25 x 20 mL sachets)
HI 70442P
1500 ppm calibration kit
(25 x 20 mL sachets)
HI 73301
Spare electrode for DiST1
HI 73302
Spare electrode for DiST2
HI 73303
Spare electrode for DiST3
HI 73304
Spare electrode for DiST4
HI 731326
Calibration screwdriver (20 pcs)
