manualshive.com logo in svg

Hanna Instruments C 216, Instruction Manual, Page: 32 / 52

Share
Download
Hanna Instruments C 216 Instruction Manual Download Page 32

32

10 mL

SPECIFICATIONS

Range

0.00 to 5.00 mg/L

Resolution

0.01 mg/L

Precision

±0.03 mg/L @ 1.00 mg/L

Typical EMC

±0.01 mg/L

Deviation

Light Source

Tungsten lamp with narrow band interference filter

@ 575 nm

Method

Adaptation of the USEPA approved method. The

reaction between free copper and the bicinchoninate

reagent causes a purple tint in the sample.

REQUIRED REAGENTS

Code

Description

Quantity/test

HI  93702-0

Bicinchoninate

1 packet

REAGENT SETS

HI 93702-01

Reagents for 100 tests

HI 93702-03

Reagents for 300 tests

For other accessories see page 49.

MEASUREMENT PROCEDURE

• Select the program number corresponding to Free Copper on the

secondary LCD by pressing PROGRAM 

▼

 and 

▲

.

• Fill the cuvet with 10 mL of unreacted

sample, up to the mark, and replace
the cap.

• Place the cuvet into the holder and

ensure that the notch on the cap is
positioned securely into the groove.

• Press ZERO and “SIP” will blink on the display.

FREE COPPER

Free Copper

Summary of Contents for C 216





















































Reviews:

No comments