![background image](http://html.mh-extra.com/html/hanna-instruments/aquadip/aquadip_instruction-manual_590980001.webp)
Instruction Manual
AquaDip
Rugged Waterproof
TDS / °C meter
Manufacturers since 1978
This Instrument is in
Compliance with the CE Directives
SPECIFICATIONS
Range
0 to 1999 ppm
0.0 to 60.0 °C
Resolution
1 ppm
0.1°C
Accuracy
± 2% f.s.
± 0.5°C
Typical EMC
± 2% f.s.
Deviation
± 0.5°C
TDS Factor
0.5
Calibration
Factory-calibrated
Temperature
Automatic from 0 to 60°C
Compensation
β
=2%/°C, Tref.=25°C
Battery Type
2 x 1.5V AAA Alkaline
Environment
0 to 50°C; 100% RH
Dimensions
92 x 38 x 450 mm (3.6x1.5x17.7")
Warranty
All Hanna Instruments meters are warranted for two years against defects in workman-
ship and materials when used for their intended purpose and maintained according to
instructions. This warranty is limited to repair or replacement free of charge.
Damages due to accident, misuse, tampering or lack of prescribed maintenance are not
covered.
If service is required, contact the dealer from whom you purchased the instrument. If
under warranty, report the model number, date of purchase, serial number and the
nature of the failure. If the repair is not covered by the warranty, you will be notified of
the charges incurred. If the instrument is to be returned to Hanna Instruments, first
obtain a Returned Goods Authorization number from the Customer Service department
and then send it with shipping costs prepaid. When shipping any instrument, make sure
it is properly packaged for complete protection.
To validate your warranty, fill out and return the enclosed warranty card within 14 days
from the date of purchase.
Recommendations for Users
Before using this product, make sure that it is entirely suitable for the environment in
which it is used. Operation of this instrument in residential areas could cause interfer-
ence to radio and TV equipment. Any variation introduced by the user to the supplied
equipment may degrade the instrument EMC performance. To avoid electrical shocks,
do not use this instrument when voltage at the measurement surface exceeds 24 VAC or
60 VDC. To avoid damage or burns, do not perform any measurement in microwave
ovens.
05/00
PRINTED IN PORTUGAL