Disinfection Device
Hankscraft Runxin, LLC 300 Wengel Drive 608.524.9465 hrh2o.com [email protected]
5
4.
Product Installation
1.
Cut the supply tube where the disinfection
device will be located.
2.
Insert end of tube into female threaded hex nut.
3.
Place plastic insert into the end of the cut tubing,
pressing in firmly.
4.
Place tubing with insert into the
disinfection device until the stop is
reached. Tighten the hex nut until firm.
5.
Repeat Steps 2-4 for the opposite side of
the disinfection device.
