7
2. Installation:
①
.Connect the Matrix’s HDMI Input to signal source (eg. DVD, STB) with
HDMI cable.
②
.Connect the Matrix’s HDMI Output to display device (eg.TV set) with HDMI
cable.
③
.Turn on DVD, TV set and HKTM0204MH4 or HKTM0204MH4 matrix.
④
.Switch and select the Input source by button or IR remote.
3.Operation
①
Manual Control:
You can operate HDMI source switching manually by
using the buttons labeled “HDMI out” located on the front panel. Press the
button that corresponds to the output that you want to change the HDMI
source on and toggle through until the desired HDMI input source video is
being displayed. A numerical LED indicates which HDMI source in being
shown on each output. On the HKTM0402MH4, long press the “HDMI out1”
button long than 3 seconds, the analog audio outputs and TOSLINK fiber
optical digital audio output will be open and the audio output provides audio
from source device used by Output 1. long press the “HDMI out1” button long
than 3 seconds again, the analog audio outputs and TOSLINK fiber optical
digital audio output will be close.
②
Remote Control:
Included with the Matrix is a remote control. The remote
control can be control the matrix by pointing it at the front of the matrix.
Targeting the integrated IR receiver labeled IR.IR uses line-of-sight between
the remote control (or IR-TX) and the receiver. The angle which the remote will
work is at about a 15 degree angle in either direction to the receiver. If the
receiver is positioned such that there is not line-of-sight, the port labeled “IR
EXT.” accepts an optional IR receiver. The receiver enables line-to-sight if the
matrix is out of position.
