Setting Temperature
Setting temperature ( -10℃ ~ 40℃)
Setting temp. limit
Setting Time
Up to < 100 hr, Continuous run (00:00)
5 0 0 0 0
1 0 0 0 0
3 0
5 5
1
8.7
1 9
View Settings
Verifying the setting
parameters during
centrifugation
Pulse
After reaching the set speed, the centrifugation
is decelated and stopped
Setting Speed
Setting RPM
Setting RCF
Quick Guide
Ultra 5.0
Cat. No. : UL-5.0
Display & Control Panel
LED Display
Status of RPM / RCF / Time / Temperature /
Rotor ID / Program / ACC / DEC
Max. RPM :
50,000 rpm
Max. RCF :
254,340 xg
Stop
Start
Key Lock Power Switch
Setting ACC / DEC Rate
ACC (0 ~ 9 steps, Max.9)
DEC (0 ~ 9 steps, Natural DEC.0)
Lid Open
Automatic Rotor ID.
Identification
Program Save / Call
Saving a program
(up to 100)
Calling up a program
Saving / Calling Up a Program
Press a parameter
to be changed
Press the
Enter button
Enter the desired values
on the keypad
Enter the desired
program number on
the keypad
Press the
Save or call button
Setting Run Parameters
(RPM / RCF / Time / Temperature / ACC / DEC)
Press the
Temp. limit button
Press the
Enter button
Press the
Enter button
Temperature range that stops operation when the temperature
is lower or higher than the set temperature.
Enter the desired
temperature range
on the keypad
Setting Temp. Limit
Serial No.
Installation Date
After loading the rotor,
press the Rotor ID. button to identify the rotor.
(If identification fails, enter the rotor Id. manually.)
Setting Rotor ID
