Technical Support : +82-2-3452-8966 / [email protected] 13/31
3.5 Installing/Removing the Rotor
• Only use rotors , parts , and accessories provided by Hanil Science Inc.
• Do not use scratched or cracked rotor in use.
3. Installation
1. Before installing the rotor, remove any foreign
object or moisture.
2. Load the rotor vertically onto the motor shaft.
3. Turn the lid handle until it secured.
▶ Installing : Turn the handle clockwise
▶ Removing : Turn the handle counterclockwise
When you run a fixed angle rotor, make sure that the rotor lid is tightly
closed. If you don’t close the rotor lid completely, it will be crushed.
