Quick Guide
Fleta 5
Cat. No. : FL-5
Press the Enter
knob
Be sure to set the ID of the rotor
or bucket correctly before use.
Press the Enter
knob
Turn the Enter knob
to increase, decrease the
Press Enter button
Turn the Enter knob to set
the rotor ID +
Press the Enter button
Turn the Mode knob to select
a parameter to be changed
Turn the Mode knob to move
the cursor to Rotor ID mode
Turn the Enter knob to
select the desired
program number
Turn the Enter knob to
select the desired
program number
Setting run parameters
(See ‘Setting Run
Parameters’)
Do you save?
Select [YES]
+ Press Enter knob
Press Enter knob
Setting Rotor ID & Bucket
Saving a Program
Calling up a Program
‘Enter’ Rotary Knob
Turn the knob : Up or down the values
Press the knob : Setting mode, Save the values
‘Mode’ Rotary Knob
Turn the knob: Select a parameter
Start
Stop
Lid Open
Max. RPM
5,500 rpm
Max. RCF
6,230 xg
Timer
< 100 hr, continuous
Program
100
ACC / DEC Ramps
9/10
Display & Control Panel
Display Screen
Status of RPM / RCF / Time /
Rotor ID / ACC / DEC / Program
Setting Run Parameters
(RPM / RCF / Time / ACC / DEC)
Serial No.
Installation Date
