Save
Select the program number → Press the Program button → Set the run parameters
→ Press the Enter button
Cursor keys / Enter
Function selection(◀,▶)
Increase or decrease
the values(▲,▼)
Save the values ( )
Quick Guide
Fleta 4
Display & Control 안내
Cat. No. : FL-4
RPM setting mode : RPM flashes
RCF setting mode : RCF flashes
Time setting mode : 00’ 00’’ flashes
Call up
Select the program number → Press Setup / Enter button
Setting Run
Parameters
(RPM / RCF /
Time / ACC /
DEC / Rotor ID)
Display Sceen
RPM / RCF / Time / Program / Rotor ID / ACC / DEC
Program Save / Call
Saving / Calling up a
program (Up to 10)
Lid Open
Press the
Enter button
Press the
Enter button
Select a parameter to be
changed (Press ◀ or ▶ button)
+ Up or down the values
(Press ▲ or ▼ button)
Press the
Setup / Enter
button
Press the
Program button
Select the program number
(Press ▲ or ▼ button)
Rotor ID mode : Rotor flashes
ACC / DEC setting mode : ACC / DEC flashes
Max. RPM
4,000 rpm
Max. RCF
3,243 xg
Timer
< 100 min, Pulse
continuous
ACC / DEC
Ramps
5/6
Start / Stop / Pulse
Pulse
After reaching the set speed,
the centrifugation is decelated
and stopped
Serial No.
Installation Date
Saving / Calling
Up a Program
