4. Operation
4.2 Opening and closing the lid
•The lid can only be opened if the centrifuge is switched on.
•Do not reach with your fingers between the housing and lid.
•Close the lid completely before operation.
•
Opening the lid
Press the ( ) door key
•
Closing the lid
Put the lid on and press the edge of the lid.
4.3 Loading tubes
• Only use tubes provided or approved by Hanil Scientific Inc.
• Always use the same type of tube.
• Tubes should be loaded symmetrically.
• Do not exceed the maximum rated speed of the tube.
• Same volume of sample should be put on tubes.
• Check symmetric loading by balncing tubes with scales.
①
Check the maximum load for each tube.
②
Put tubes into rotor holes.
③
Tubes located opposite each other must be the same type and contain the same quantity.
sales
@ihanil.com / [email protected] l 10
Summary of Contents for Component R6
Page 18: ...7 Rotor 7 1 Swing out rotor 17 l www ihanil com ...
Page 19: ...MEMO ...
