HANGZHOU WORLDE MUSIC ELECTRONIC CO., LTD
KX61/76/88HC
11
3.5. ASSIGNABLE SLIDER
（
SA1~SA8
，
SB1~SB8
）
ü
8 sliders that can be assigned channel and controller No. independently.
ü
There are two groups, switched by KA/KB button. If the indicator of SA is ON,
SA1~SA8 are active; if indicator of SB is ON, then SB1~SB8 are active.
ü
Operate the slider to select the slider, the very indicator is ON, LED shows the
adjusting value.
ü
Input the No. with NUMERIC button and +/- button is OK when the slider is
selected.
ü
Please refer to 3.3.14 as to how to assign channel and controller.
3.6. ASSIGNABLE BUTTONS
（
RTZ,REW,FF,REC,STOP,PLAY
）
ü
6 buttons that can be assigned controllers independently.
ü
Then channel No. is 0.
ü
When the buttons are active, the value is 127
（
for instance, default controller No.
of RTZ is #114, B0 72 7F is sent when RTZ button is pressed
）
.
ü
It is common to set the 6 buttons as Sequencer remote control buttons, which
needs to be assigned and connected in sequencer software. Take SONAR as an
example, Select Options--Control Surfaces in SONAR, then create a Cakewalk
Generic Surfaces in the pop-out window, select KX61/76/88HC as input (input to
be USB Audio Device or Sound Card, it depends on connecting via USB or MIDI).
Press ENTER, then add Control Surfaces to toolbar. The window Generic
Surface appears when clicking the property of Control Surfaces. Select proper
buttons, such as Play in Global Parameters, then press PLAY button on the
keyboard, and click Learn, corresponding info will be displayed in the MIDI
message on the right side of the window: Controller 119
（
initial value
）、
Channel 1
（
initial value
）
. Change Trigger into 127, the assignment and connection of PLAY
button is done. This also applies to other buttons.
ü
Please refer to 3.3.14 as to how to assign controllers.
3.7. ASSIGNABLE WHEEL
（
WHEEL P
，
WHEEL M
）