Hangar 9 Alpha 40 with Spektrum DX5e Assembly Manual Download

Page: 4 / 48

UltraCote Covering Colors

• White

(HANU870)

• Black

(HANU874)

• Orange

(HANU877)

• Silver

(HANU881)

Before Starting Assembly

Before beginning the assembly of the Alpha RTF w/DSM, remove each part from its bag for inspection. Closely inspect

the fuselage, wing panels, rudder, and stabilizer for damage. If you find any damaged or missing parts, contact the

place of purchase.
If you find any wrinkles in the covering, use a heat gun or sealing iron to remove them. Use caution while working around

areas where the colors overlap to prevent separating the colors.

FS One

With FS One you get more than photorealistic fields, gorgeous skies and realistic-looking aircraft. You get incredibly

advanced aerodynamic modeling that simulates every possible aspect of real-world flight.

The first Hangar Pack will add even more aircraft to FS One. This latest edition

includes ten new planes and helis from your favorite brands, including

Hangar 9, E-flite and Align. You’ll be able to fly aircraft that are only available

on FS One such as the T-REX, Blade CX2, Blade CP Pro, Hangar 9 P-51

and F-22 PTS. And as always, with the Hangar Pack, you still get all the

same great features that you did with the original aircraft.

Instructions for Disposal of WEEE by

Users in the European Union

This product must not be disposed of with other waste. Instead, it is the user’s responsibility to dispose of their waste

equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic

equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve

natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more

information about where you can drop off your waste equipment for recycling, please contact your local city office, your

household waste disposal service or where you purchased the product.

HANS2000

HANS4010

HAN100 – Heat Gun

HAN150 – Covering Glove

HAN101 – Sealing Iron

HAN141 – Sealing Iron

Sock

Summary of Contents for Alpha 40 with Spektrum DX5e

















































Search results

Summary of Contents for Alpha 40 with Spektrum DX5e

Reviews:

Related manuals for Alpha 40 with Spektrum DX5e

Brands by name

Popular brands

Hangar 9 Alpha 40 with Spektrum DX5e, Assembly Manual

Search results

Summary of Contents for Alpha 40 with Spektrum DX5e

Reviews:

Related manuals for Alpha 40 with Spektrum DX5e

Brands by name

Popular brands