The luminaire must be installed by professional electrician.
Switch power off when wiring the luminaire.
Ensure input voltage conforms to the voltage range of product.
Ensure wires are securely connected.
Before switching on, ensure that all the wiring is correct.
The warranty is void if product is not installed according to the instructions.
WARNING
Product Code:
STAX20W4K
STAX30W4K
STAX15W30W-TRI
STAX50W-TRI
STAX100W4K
STAX150W4K
STAX200W4K
For more information
www.haneco.com.au
1300 001 LED
1. Ensure mains supply is switched off before commencing installation.
2. Mark wall with appropriate fixing position and install the bracket with appropriately rated fixing hardware.
Installation
3. Adjust luminaire to the desired angle.
4. Connect luminaire to 240V main supply as per diagram.
Brown: L
Blue: N
Yellow & Green: