The luminaire must be installed by professional electrician.
Switch power off when wiring the luminaire.
Ensure input voltage conforms to the voltage range of product.
Ensure wires are securely connected.
Before switching on, ensure that all the wiring is correct.
The warranty is void if product is not installed according to the instructions.
WARNING
Product Code:
STAX10WB5K-S
STAX20WB5K-S
STAX30WB5K-S
STAX50WB5K-S
For more information
www.haneco.com.au
1300 001 LED
1. Ensure mains supply is switched off before commencing installation.
2. Mark wall with appropriate fixing position and install the bracket.
Installation
3. Adjust luminaire to the desired angle.
5. Sensor function regulation.
4. Connect the luminaire to the main supply using suitable IP rated enclosure.
Brown: L
Blue: N
Yellow & Green:
ART05062019
AMBIENT LIGHT
10-2000 lux
TIME DELAY
10 ± 3 seconds to
7 ± 2minutes
DETECTION DISTANCE
2 to 8m
DETECTION RANGE
120°
INSTALLATION HEIGHT
1.8m to 2.5m
1. To activate MANUAL MODE, switching OFF/ON momentary action at switch unit
once within 2 seconds. In MANUAL MODE, the unit will remain ON and it will not be
affected by the TIME and LUX controls.
2. To deactivate MANUAL MODE, switching OFF at the switch unit for 10 seconds
then switch ON. The PIR motion sensor will reset to warm-up period for 30 seconds
and returns to AUTO MODE.
Manual Override