User’s Manual
Digital Wireless Microphone Swany
Usage
HandyWave Co., Ltd.
www.handywave.com
3/5
Power On/Off
To operate the Transmitter, push the jog switch. When the Transmitter is powered on, PWR
LED turns to green color. When speaker is also powered on, the LNK LED turns to blue
color. If you push the jog switch one more, the Transmitter will be powered off.
MIC Connection
Connect stick Mic or head Mic into the MIC jack. By connecting audio devices such as MP3,
you can listen to the music (use audio cable provided).
Volume Control
If you full the jog switch with finger clockwise, the volume will become high and become low
when turn counterclockwise. You can also control the speaker volume with the volume knob.
Charging
When using the Transmitter, if the battery becomes weak, the PWR LED turns to orange
color. Use after charging the Transmitter using the charging cable provided. Turn off the
Transmitter when charging. Charging can be done with the USB port of the speaker or PC
that is powered on. During the charging the CHG LED is in red color and turns to green
color when finished.
Pairing
When you replace one of the unit between the Transmitter and speaker, you should make
pair the units prior to use. Push the PAIR switch of the units using a sharp thing such as
point of a pencil in few seconds by turns. When paired, the LNK LED of the units turn to
blue color.
