36
x94
Move to the opposite end. Using the long edge of the panel
as a lever, move the panel side-to-side until the top corner
is flush to the peak
(Fig. B)
.
You may need to move your backwall in or out to get the
same measurement
(Fig. C)
.
Secure panel using (2) 2" nails in the corners.
2
Place the
48 x 96"
panel with a 1/4" measurement back from the gable trim
(Fig A)
and flush at the peak
(Fig. B)
.
Secure panel using (2) 2" nails in the corners.
1
BEGIN
2" (5 cm)
PARTS REQUIRED:
ROOF PANELS
x2
48" x 96" (122 x 244 cm)
Roof panels may cause serious injury until securely fastened.
Note: all roof panels need to be installed with the rough side up (painted grid lines).
Two Nails
1/4"
(0,6 cm)
Fig. C
48" x 96"
Flush at peak.
Fig. B
Fig. B
Flush at peak.
Same
Measurement
Two Nails
Gable
Trim
Fig. A
DOOR
DOOR
