WARRANTY
All of our dryers are designed and manufactured to provide years of dependable performance.
Component parts are guaranteed to be free of defects in material and workmanship for a
period of one (1) year from date of original invoice. This guarantee will be honored provided
that the dryer is installed and maintained in accordance with the instructions. Parts damaged
during the installation are the purchaser’s responsibility. The warranty covers defects
exclusively, and only liability for the replacement of defective parts will be accepted. This
warranty does not cover wear and tear, or misuse and abuse. Transportation, freight cost and
labor are also excluded. Defective parts must be returned prepaid, accompanied by the serial
number, to the point of purchase.
This warranty is granted solely to the original purchaser of the unit and is subject to registration.
Periodic cleaning of the unit is recommended.
Remove cover and clean dryer dust lint.
Wipe the cover with a damp cloth and mildcleaning solution. Do not soak.
Never use abrasives to clean the cover.
Ensure the breaker supplying the dryer is operational. If it is,
disconnect the power and remove the hand dryer cover.
Check all the wire connection to sure they are well fixed.
Turn on power and if it does not work then replace circuit board.
Turn motor blower several times by hand to see it is blocked.
Ensure that there is no obstruction on or in front of the infrared
sensor zone. Clean any dirty off the sensor lens.
Try adjusting the sensitivity potentiometer on program board.
If not still not work, replace circuit board and sensor board.
Check the motor brush worn condition. Replace them or a new
motor.
Check if the heat element switch is power on.
Check if the heat element was broken. If yes, replace a new one.
Hand dryer fails to
start
Hand dryer turns
on/off erratically
or not sensitive
enough
Hand dryer makes
ticking noise
Not hot air
MAINTENANCE
DIAGNOSTICS & REMEDIES