Note: If you want to delete your “init.lua” file, you can do that easily. Simply type file.remove(“init.lua”) and press
the button “Send” (see Figure above). Or you can type the command file.format() to remove all the files saved in your
ESP8266. You can type any commands and send them to your ESP8266 through that window.
After uploading your code to your ESP8266, unplug your ESP8266 from your computer and power up the ESP8288
module.
Congratulations, you’ve made it! The blue LED at the upper right corner should be blinking every 2 seconds!
21
