background image

-20-

DECAL LOCATION

Your Rake was manufactured with operator safety in mind. Located on the Flex-Frame Rake are various
decals to aid in operation, and warn of danger or caution areas. Pay close attention to all the decals.

DO NOT REMOVE ANY OF THESE DECALS. IF DECALS ARE LOST, DAMAGED,
OR IF THE FLEX-FRAME RAKE IS REPAINTED, REPLACE DECALS.
REMEMBER: DECALS ARE FOR YOUR PROTECTION AND INFORMATION.

Listed below are the decals on your H&S Flex-Frame Rake. These decals may be ordered individually
by part number or by ordering complete set.

311

1

Patent Numbers

1906C

2

Stay Clear

2195

11

WARNING - Stay Clear of Rake

21804

1

Attention - Never Adjust Main Frame

60354

1

H&S Flex-Frame Rake RH

60355

1

H&S Flex-Frame Rake LH

2

Model Number-6116

60854

1

H&S Flex-Frame Rake Rear

11599

7

WARNING - Do Not Go Near Leaks

11694A

8

DANGER - Stay Clear of Rake

12197A

1

Attention: Raise Rake Wheels

54034

1

Made in the USA - 4”

71188B

1

Jack Storage Position

72203A

1

WARNING - Help Avoid Injury

BFR723

1

SMV Sign Kit

DCAMB

10

Amber Reflector - 2” x 9”

DCRED

2

Red Reflectors

093020

17

Grease Zerk

PART     QUANTITY

DESCRIPTION

Summary of Contents for 6116

































Reviews: