H&S 5242, Operator'S Manual

Page: 13 / 42

TRACTOR:
This Operators Manual uses the term “Tractor” when identifying the power source.
W A R N I N G
TO PREVENT SERIOUS INJURY OR DEATH
Study The Above Safety Rules
ATTENTION - BE ALERT - YOUR SAFETY IS INVOLVED
BEFORE YOU ATTEMPT TO OPERATE THIS EQUIPMENT, READ AND STUDY THE FOLLOWING
INFORMATION. IN ADDITION, MAKE SURE THAT EVERY INDIVIDUAL WHO OPERATES OR WORKS
WITH THIS EQUIPMENT, WHETHER FAMILY MEMBER OR EMPLOYEE, IS FAMILIAR WITH THESE
SAFETY PRECAUTIONS.
H&S Manufacturing Co., Inc. always takes the operator and their safety into consideration and guards
exposed moving parts for their protection. However, some areas cannot be guarded or shielded in order to
assure proper operation. In addition, the operator’s manual and decals on the
Top Shot itself warn you of
further danger and should be read and observed closely.
-11-
KNOW HOW TO STOP THE TOP SHOT BEFORE STARTING IT.
If the Top Shot becomes clogged or needs servicing, stop the tractor engine, remove ignition key, and
allow all mechanisms to stop. Before cleaning or working on the Top Shot, detach the PTO shaft, and
completely disengage the tractor hydraulics.
DO NOT attempt to perform maintenance or repair with tractor running, and PTO, and hydraulic hoses
connected to the tractor.
DO NOT step up on the Top Shot at any time while in operation.
NEVER manually feed material into the expeller.
DO NOT allow minors to operate or be near the Top Shot.
DO NOT ALLOW PERSONNEL OTHER THAN THE QUALIFIED OPERATOR NEAR THE Top Shot.
STAY CLEAR of discharge expeller when in operation.
Keep hands, feet, and clothing away from all moving parts when the Top Shot is in operation.
Loose or floppy clothing should not be worn by the operator.
Be sure the Top Shot is clear of people, tools, and other objects before engaging PTO.
DO NOT step over PTO shaft: Stay clear of PTO at all times.
NEVER start the Top Shot until all guards and safety shields are secured in place.
NEVER operate the Top Shot with a PTO speed greater than the recommended PTO RPM.
STAY CLEAR of hydraulic lines as they may be under extreme pressure or heat.