Handlermfg.com | 750 SaniVac Instruction Manual | 2012
Troubleshooting Guide
Problem
Check Point
Solution
Suction power is weak.
Vacuum bag
Wand or hose
If bag is full, replace it.
If clogged or blocked
remove the object
Vacuum does not work
Is the hose adapter inserted
into the vacuum
completely?
When the vacuum bag is
full or if the wand or hose is
blocked, the motor thermal
protection is activated.
Insert it completely
Unplug the vacuum and
check the bag, wand and
hose and remove any
blockages. The vacuum can
be turned on again after
approximately 20 minutes
Power cord does not rewind
Power cord
Pull the power cord out a
little and press the cord
rewind button again
Power cord won’t pull out
of the vacuum
Power cord
Do not pull the cord by
force. Rewind it a little by
pressing the cord rewind
button and try pulling it out
again.
Polarization Instruction
Power Cord, 2-Wire Polarized Cord
QuickTime™ and a
decompressor
are needed to see this picture.
Household model FB-SSCAN
To reduce the risk of electric shock this product is equipped with a polarized alternating
current line plug (a plug having one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you are unable to insert the plug
fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact a
qualified electrician to replace the obsolete outlet. Do not defeat the safety purpose of the
polarized plug.
Easy PDF Creator is professional software to create PDF. If you wish to remove this line, buy it now.
