7
Additional Accessories for all models
16 Chuck/Changer kit
includes:
P16-21H Mandrel (1/32)
P16-20 Mandrel (1/64)
P16-15 Arbor Band Chuck
P16-16 Spiral Tapered
Chuck
P16-19 Stone Chucks
P16-10RW Clutch
P16-8 Collet Wrench
7 Tapered Steel Chuck
The 7 tapered chuck is designed
specifically for use with buffing wheels,
brushes and lead centered wheels.
Precision manufactured of alloy steel, this
chuck is built for placement onto lathes
and polishing motors containing standard
dental tapered shafts. Specify 7L (Left) or
7R (Right) when ordering.
Shipping Wgt.: 6 oz [107 g]
Unit Dimensions: 5/8”
Shank Diameter x 3 5/8” L [2cm x 9cm]
7B Tapered Brass Chuck
The 7B tapered chuck is designed
specifically for use with buffing wheels,
brushes and lead centered wheels. The 7B
Tapered chuck is made of brass to provide
easier on/off placement onto tapered
dental shafts, causing less shaft wear.
Specify 7BL (Left) or 7BR (Right) when
ordering.
Shipping Wgt.: 6 oz [107 g]
Unit Dimensions: 5/8” Shank Diameter x 3
5/8” L [2cm x 9 cm]
18 Atlas Precision Chuck
The 18 Atlas chuck is a precise
“Jacobs type” chuck for use with chuck
accessories having a diameter of .001”
[0.03mm] to .250” [6.4mm]. The 18 Atlas
chuck attaches to the right shaft of a
dental lathe with standard dental tapered
shafts. Machined to precision limits, the
18 Atlas provides the technician with
concentricity unmatched by any other
adjustable chuck with no run-out and no
vibration. For Right shaft only.
Shipping Wgt.: 1 lb [0.5 Kg]
Unit Dimensions: 2 1/2” L x 1 1/4”
Shank Diameter [6cm x 3cm]
Additional accessories and lathes
sold with accessories available.
Handlermfg.com
i
The Handler Chuck/Changer
was designed to provide
full automatic, precision changing of 1/4” [6.3mm] and
3/32” [2.4mm] diameter burs, mandrels and chuck
accessories with the slight movement of a handle while
the motor is turning. The Chuck/Changer provides
the technician with exacting concentricity and quick,
easy changing of various chucks which greatly speeds
grinding, polishing and finishing procedures.
The 16 Chuck/Changer is installed on the right side of the
lathe and is adaptable to most types of dental motors,
including Red Wing and Baldor (special adapter required).
The 16 Chuck/Changer Kit is shipped complete with
chuck accessories as follows:
550 Porta-Vac Bench Top Dust Collector
A favorite of dental offices, the 550 Porta-Vac
is perfect for bench top light grinding and
polishing with a hand piece or lathe.
62-II Super Sucker II
The 62-II Super Sucker develops 110
CFM ( cubic feet / minute) at a static
pressure of 63” of H20 and is one of
the most powerful single station dust
collectors available. Designed for
continuous duty, the disposable HEPA
filter bag is easily removed.
86D Splash Hood - 6” wide
Safety in the lab is essential. The 86D
Splash Hood is the definitive answer
when polishing prosthetics or appliances.
Its contemporary design and
features contain pumice and other
polishing agents for a safer and
healthier workplace
