H&K PRET 601774, User Manual

Page: 9 / 11

FK 401A Controller configuration
Read following instructions fully before commencing any alterations
This controller has been factory pre-set and should only be changed under instruction from H&K
Set key
Display Adjustment keys
Programming the controller to the cabinet
Commence with the unit switched on
If before all of the proceeding steps are completed no key action is detected for 60 seconds the
controller will revert back to its running mode.
Step Press Display
reads
Press Display reads Adjust display
( ¿ and À keys)
to read
1 ¿ and À
simultaneously and
hold for approx. 4sec.
PA Set 0 -19
2 ¿ and À
simultaneously
hold
- / 0 Set
previous setting
2
3 ¿ key / 0 Set previous setting 11
4 ¿ key / 1 Set previous setting 2
5 ¿ key / 2 Set previous setting 3
4 ¿ key / 5 Set previous setting 1
5 ¿ key / 6 Set previous setting -20
6
¿
key
/ 7
Set previous setting
80
7 ¿ key / 8 Set previous setting 1
8 ¿ key rA0 Set previous setting -2
9 ¿ key rA1 Set previous setting 93
10 ¿ key rA2 Set previous setting 93
11 ¿ key rA3 Set previous setting 1
12 ¿ key rA4 Set previous setting 0
13 ¿ key rA5 Set previous setting 0
14 ¿ key rb0 Set previous setting -2
15 ¿ key rb1 Set previous setting 86
16 ¿ key rb2 Set previous setting 86
17 ¿ key rb3 Set previous setting 1
18 ¿ key rb4 Set previous setting 0
19 ¿ key rb5 Set previous setting 0
On completion of the proceeding steps press ¿ and À keys simultaneously. The controller will adopt the new settings.
Issue 1:2 06.05.03 9