Use of the scooter | 31
Trophy 20 UM 30
Figure 24
• Once the scooter has been loaded, check if the
batteries are
fi
xed with their belts.
• You are responsible for ensuring that all of the
components of the dismantled scooter are secured
in the car and that they will pose no hazard in the
event of a collision.
5.8 Transporting the scooter
The following guidelines should be observed when
transporting the Trophy 20 in its fully assembled state
by car suitable for this purpose:
Warning!
If the scooter is to be lifted into the car, never lift the
scooter by its plastic covers and do not attempt to lift
the scooter on your own. If your scooter fi ts into a car
in a fully assembled state, do NOT use the scooter as
a passenger seat in the car. You must be seated in a
normal car seat, even if the car n question has been
adapted for the transportation of scooters. The reason
for this is that the Trophy 20 can not offer the same
level of safety as a normal car seat, irrespective of how
well the scooter is secured in the car.
Having positioned the scooter in the car, you must
check that the scooter is not in freewheel / neutral
mode.
The scooter features securement points on the rear
and underneath (at the front of the platform, see
fi
gure
24). The securement points are exclusively designed
for facilitating securement. We would like to point out
that any dismantled scooter components which are not
secured in a vehicle may cause damage if the vehicle
should make any abrupt movements.
