10
M A N U A L System
RoMedic
TM
Instructions for use
These instructions must be followed for correct use of MiniLift160.
Caution
The actuator does not lower the lift arm when the lift is being lowered. This reduces the risk of the user being pinched by
the lift arm. To prevent the lift arm from at first catching, and then suddenly fal the lift arm must be loaded throughout the
entire lowering procedure, so that it is always supported by the actuator.
Hand control functions
The hand control has four functions: up and down (lift arm), out and in (base width).
Two functions cannot be used at the same time.
NOTE:
The hand control functions do not operate if the emergency stop button is activated
NOTE:
MiniLift160 is not intended for transporting users. It may only be used for short transfers.
Caution
Never move the lift by pulling on the actuator.
Caution
Ensure that the user’s feet do not get caught between the footplate and the floor. Ensure that the user’s feet do
not get caught between the footplate and the base when adjusting the base width.
