Programmer
Version 2015v1
13
3 Programmer
The Fortress Calypso can be programmed with both the DX-HHP Hand-Held-Programmer and the Wizard. In both
cases, use the orange DWIZ adaptor and connect to the charger socket of the scooter.
For the standard settings of the programmer, see the R series DR-50 and DR-90 installation manual that can be
downloaded on
www.dynamiccontrols.com
.
The driving programs for Handicare products can be found on our FTP server.
Log on to the FTP server:
•
Open internet explorer
•
Go to ftp://mobilityftp.handicare.com
•
Enter user name and password
User name: [email protected]
Password: dealer
•
You will be logged on
•
Select your wheelchair and the appropriate controller
•
Click the file to download
If you wish to order parts for your programmer, please contact Handicare.
DWIZ-ADAPT 1009567
The specific and optimised Fortress Calypso settings are summarized in the table below.
*These settings have no influence, are set via dip-switches on Tiller PCB (see Chapter 6.3)
User Personalisation
10km/h or 6mph
8km/h or 5mph
Swap Throttle Direction
No
No
Enable Beeper
Yes
Yes
Flash Code Beeper
No
No
Sleep Beeper
Yes
Yes
Reversing Beeper*
Yes
Yes
Beeper On Time (ms)
300
300
Beeper Off Time (ms)
700
700
