background image

12

U S E R   M A N U A L System

RoMedic

TM

Maintenance

The lift must undergo thorough inspection at least once per year. Inspection must be performed by authorized personnel 
and in accordance with Handicare’s service manual.
Repairs and maintenance may only be done by authorized personnel using original spare parts.

 

Used batteries are to be left at the nearest recycling station. Used batteries can also be returned to 

 

Handicare or a Handicare dealer for recycling.

+50 ºC

-10 ºC

Cleaning/disinfection

If necessary, clean the lift with warm water or a soap solution and check that the castors are free from dirt and hair. Do 
not use cleaning agents containing phenol or chlorine, as this could damage the aluminium and the plastic materials. If 
disinfection is needed, 70 % ethanol, 45 % isopropanol or similar should be used.

Storage and transportation

If the lift is not to be used for some time or e.g., during transport, we recommend that the emergency stop button be 
pressed in. The lift should be transported and stored in -10 ° C to + 50 ° C and in normal humidity, 30% -75 %. The air 
pressure should be between 700 and 1060 hPa. Let the lift reach room temperature before the batteries are charged or 
the lift is used.

Service agreements

Handicare offers the possibility of service agreements for maintenance and regular testing of your mobile lift. Contact 
your local Handicare representative.

106 kPa

70 kPa

75%

30%

1060 hPa

700 hPa

+50 °C

-10 °C

75%

30%

Summary of Contents for Eva400





















Reviews: