Handicare Emineo, User Manual

Page: 37 / 44

37
TECHNICAL SPECIFICATIONS
Technical specifications and dimensions
The wheelchair is delivered as standard in several different seat heights and
seat widths. The height that best suits the user of the wheelchair depends on two
factors: The height of the user and how the wheelchair will be operated. Ask your
dealer or enquire at your nearest aids centre if you are uncertain as to whether
you have the correct height and width. (Dimensions are given in centimetres
unless otherwise specified. Measurements given can vary +/– 1 cm.)
Seat height
– front = standard
The table shows front seat heights when using different kinds
of fork and wheel sizes as well as seat heights when moving
the position of the castor wheel inside the fork. The one-tool
fork fastening also makes it possible to lift or lower the fork.
Fork Castor wheel
One-tool Basic
92 mm 4”/100 mm 36-42 36-38
92 mm 5”/125 mm 38-44 38
120 mm 5”/125 mm 38-46 38-42
120 mm 6”/150 mm 40-46 40-42
146 mm 5”/125 mm 38-48 38-44
146 mm 6”/150 mm 38-48 40-46
146 mm 8”/200 mm 44-48 46-48
Seat width 39, 45 and 51
Seat depth 39 - 45
Seat height
– back Driving wheel Seat height – back
20” 36 - 44
22” 38 - 46
24” 40 - 48
Backrest
height 50 - 60
Backrest
angle 0˚- 15˚ / 0˚ - 31˚
Seat tilt
-5
˚
- 20
˚ / -1˚ - 15˚
Armrest
height
23 -33