Periodic inspection - instruction
Base
-Check the base for visible damage to the surfaces, finish, etc.
Castors
-Roll the lift unloaded on the floor, check that the castors roll and turn freely.
-Check that the castor fasteners are tight.
Brakes
-Lock the brakes. Check that the castors do not turn when the lift is pushed.
Screws and joints
-Check screws and ball joints, and listen for peculiar noises and vibrations.
Mast
-Check the mast for visible damage to the surfaces, finish etc.
-Check screws, nuts, bolts etc.
Footplate
-Check the footplate for visible damage to the surfaces, finish, etc. Make sure it is correctly assembled.
Liftarm, hardware
-Check the liftarm for visible damage to the surfaces, finish etc.
-Check screws, nuts, bolts etc.
Kneepad
-Check the kneepad for visible damage to the surfaces, finish, etc. Make sure it is correctly assembled.
Slingbar and safety latch function
-Check to ensure that there is no visible wear or damage.
- Check the function of the safety latches.
Mast actuator
-Verify that the upper and lower actuator fasteners to the mast are tight.
-Visual inspection.
-Check of abnormal noise level.
Battery and cable installations
- Check battery and electrical cable
.
- Verify that all cables are properly inserted.
Handset
-Verify that all functions on the handset are working.
Emergency stop
-Verify that the lift does not operate when emergency stop is pressed in.
Description for periodic inspection
19
