Quick Reference Guide Handicare 2000
11
6. Display
On the lift is a display which shows a diagnostic code to help you to locate the
cause of the breakdown. The codes can be found on page 4/5 and in the user-
and installation manual.
7. The toggle
The lift is operated by the toggle on the armrest. The toggle as well
as the key switch or the button for the powered footrest raiser can be
swapped from right to left on side.
The lift will not ride when the armrests are in the folded position. It does
however operate on the remotes.
During the ride the diagnostic
display show “8” or “9”.
An installation toggle loom
can be used to ride the power
pack without chair. (art.
Nr.181001.50083).
In case of a public building when the key switch should switch off the
toggle but the remotes should stay operational, the key switch needs to
be transferred from the safety line to the control line.
8. The remotes
The remotes function on infrared. On the backside is a dipswitch for
setting a different code.
The lower button is a special button for parking the lift. On the backside
is a red,orange or green cover. Green means the remote functions on
Version 2.1
12
6.
Display
On the lift is a display which shows a diagnostic code to help you to locate the cause
of the breakdown. The codes can be found on page 4/5 and in the user- and
installation manual.
7.
The toggle
The lift is operated by the toggle on the armrest. The toggle as well as the key switch
or the button for the powered footrest raiser can be swapped from right to left on side.
The lift will not ride when the armrests are in the folded position. It does however
operate on the remotes. During the ride the diagnostic display show “8” or “9”.
An installation toggle loom can be used to ride the power pack without chair. (art.
Nr.181001.50083).
In case of a public building when the key switch should switch off the toggle but the
remotes should stay operational, the key switch needs to be transferred from the
safety line to the control line.
8.
The remotes
The remotes function on infrared. On the backside is a dipswitch
for setting a different code.
The lower button is a special button for parking the lift. On the
backside is a red,orange or green cover. Green means the
remote functions on radiofrequency (2,4 Ghz), red means the
remote functions on infrared. Orange means the remote
functions on 868 Mhz.
Under this cover you can find a dipswitch to set a different canal.
The infrared remotes work out of the box. If they don’t, they can be linked as follows:
Press and hold the red button on the board P1. A yellow light will illuminate on the
board. Press any button on the handset and the light will go out.
Summary of Contents for 2000
