HandiQuilter.com
Page 17
The HQ
18
Avanté has touch-screen displays on the
front and rear handlebars. Settings may be changed
at either of these locations.
Main Screen
Manual Mode Screen
Button Functions:
Pressing the “Regulated” button while in the Manual
Mode Screen will toggle to the Regulated Mode
Screen. The current stitching mode is displayed at
the top left corner of the screen. Different options
are available depending upon which mode the system
is in. (Figure 21)
Needle Stop
When in “Needle Up” mode (indicated by a white
circle), the needle ends in the “Up” position upon
pressing the “Stop” button on the handles. This but-
ton does not move the needle, but simply determines
the fi nal needle position after the machine has been
stopped. (Figure 22)
When in “Needle Down” mode (the radio button is
white when activated), the needle ends in the “Down”
position upon pressing the “Stop” button on the han-
dles. Again, this button does not move the needle,
but sets the fi nal resting position of the needle after
“Stop” is pressed.
Using the Touch Screen Displays on the Handlebars
Machine and Handlebar Menus
Note: Review the Handi Quilter “Welcome” DVD for inter-
active instruction on the HQ 18 Avanté menu functions.
Regulated
Manual
Up
Down
Stitch Mode
Needle Stop
More
Avanté
18
Speed
Manual
86
%
Figure 21
Figure 22
Regulated
Manual
Up
Down
Stitch Mode
Needle Stop
More
Avanté
18
Speed
Manual
86
%
