22
Scan
scan instructions
The SP400X can scan most one-dimensional and two-dimensional bar code symbologies.
See “
SP400X specifications
” for a complete list.
1. Aim the green light bar at the bar code.
NOTE:
Hold steady for best results.
When the scan is complete, the imager light will turn off, and the SP400X will emit a Hi tone.
When the SP400X is ready to print, it will display green tail lights and emit a Hi tone.
2. Hold the SP400X 6 - 9 inches from the bar code.
3. Hold the SP400X at a slight angle (approximately 5 degrees) to the scan surface.
SP400X Series - 5. Operate the SP400X
