HandHeld ALGIZ RT10, Manual, Page: 9 / 55

Version 1.0
Connections

1 x USB 2.0 port

1 X RJ45 for Ethernet 10/100/1000 LAN

1 x USB 3.0 Data Connectivity and Power input

Supports

1 x micro SD Slot

2x8 Pin Rear Docking Connector

1 x 16 pin docking connector for LTE/GPS/WLAN
Sensors

Accelerometer, Three ‐ axis Gyroscope , E ‐ compass , Light sensor,
Pressure sensor, SAR Sensor
Audio

1 Noise cancelling microphone and Speaker
Haptic Feedback

Internal vibrator
Accessibility

Four user programmable hot ‐ keys
Input Devices

USB keyboard & mouse, BT keyboard & mouse
Battery

Hot ‐ swappable 7500mAH Li ‐ Polymer Battery Pack
Notification

Two Multicolor LEDs, One Barcode scanner notification LED,
Vibration motor
Environment

Operating ‐ 20 C to 50 C ( ‐ 4 F TO 122 )
MIL ‐ STD ‐ 810G, Method 501.5/502.5 Procedure II, III

Storage: ‐ 40 C TO 70 C ( ‐ 40 F TO 158 F)
MIL ‐ STD ‐ 810G, Method 501.5 /502.5 Procedure

Drop : 26 drops from1.22m (4 ft)
MIL ‐ STD ‐ 810G, Method 516.6 Procedure I

Vibration: MIL ‐ STD ‐ 810G, Method 514.6 Procedure

Humidity: MIL ‐ STD ‐ 810G Method 507.5 Procedure II 4572 m (15.000 ft)

Attitude: MIL ‐ STD ‐ 810G, Method 500.5 Procedure I
GPS

Qualcomm
Mic

MEMS, ‐ 29db, 100Hz ‐ 10KHz, Digital
Rear Camera

16MP Camera Module with
OV16880 Sensor
Memory

External Support 1 TB
Internal Memory 32 GB
HDMI

Micro Type ‐ D
Finger Touch

10
Barcode

Yes
Finger Print

FPC1028 Finger Print Module
Speaker

Magnetic, 0.7W
Front Camera

8MP Camera Module with

OV8856 Sensor
Rear & Bottom Docking
Port

Pass Through Antenna Wifi LTE GPS
Charging

Qualcomm QC 3.0
The following optional modules are supported by the Algiz RT10:

Barcode Scanner module