H&H CS-653, Operation Manual

Page: 12 / 20

CS-653 operation manual
issue 1 14.02.19 P.11 of 19
> Operation and Controls (cont.)
>> Counter
The #3
rd
page of the panel is named “counter”. It is the showing the accumulated press cycles.
Complete cycle: the total complete cycles are accumulated.
incomplete cycle: the total incomplete cycles are accumulated (caused by a mid-way cancel or
the press work is terminated before the timer is reached to its set value.
>> Lock
The #4 page of the panel is named “lock”. It is used for lock or unlock the heating control set
value. Switch the control lock key on (the lock will lit up on the screen) then select the
temperature or time lock/unlock (lit will lit up on the right hand side circle when locked).
Switch off the control lock key when the selection is finished. The operator cannot alter the set
value when the selection is locked.
1. setting the temperature set point lock/unlock button
2. setting the timer set point lock/unlock button
3. previous page button
4. next page button
Counting clear
Previous page
Next page
3
2
4
1