HANDBOX
LITE
INSTALLATION AND SET UP FOR WORK
6
- Prepare for set up. Area of the surface must be even with access to a power
source.
- Unpack the device and put it on the floor, make sure it's stable.
- For extra stability, adjust the legs at the bottom of the device.
- Unlock the door and take out the empty tank. Unscrew the lid, fill the con
tainer with liquid hand sanitiser or switch with a full standard 5l tank.
The device supports only alcohol-based liquid hand sanitiser. The capacity
of the device is 5l.
- Screw the cap that is attached to the liquid supply tube back on the tank.
Place the tank back in the device.
- Connect the device to a 100-240VAC power source.
- Switch on the power button.
- To start using the device pump the contents of the tank. Press and hold the
button that's located next to the power button until the liquid is pumped up
the tube and starts to pour from the dispenser.
- Test the device. Insert your hand within 5 cm height from the bottom, wait
for liquid, rub your palms for 20 seconds!
- If you feel that the hand sanitising dosage is too low, easily adjust it from
any smartphone using Wi-Fi connection. Follow the instructions on
page 6
.
- Make sure that the door that accesses the hand sanitising liquid is closed
and securely locked.
The device is ready for work!
