background image

[email protected] 
handandeyestudio.co.uk

©2019

Lighting for all the senses.

•  Please read the instructions before assembly or 

installation. 

•  Be sure to use a suitably qualified person for 

installation as the lights require connecting to mains 
power

•  Install the light in conformity with all relevant local 

building codes and regulations

•  Make sure mains power is off during installation

•  Make sure that the light is fitted in a suitable ceiling 

void. Ensure nothing touches the lamp above ceiling 
level to ensure clear air circulation. Insulating 
materials should be 100mm clear of the outside edge 
of the fitting.

•  This lamp is NOT fire rated. Any accessory such as 

firehoods used with this product must be approved by 
Hand & Eye to maintain guarantee.

•  Do not use excessive force or power tools on the 

ceramic components. The terracotta is a robust 
material but if treated incorrectly can be broken. 
Broken ceramics can be sharp. 

•  Do NOT use a light bulb of more than 7W GU10 LED.

•  This spot light is suitable for use in IP44 zones or less 

only

•  If at any point your light bulb breaks then, as with any 

light, do not touch the filament/LED part unless the 
power is turned off

•  Always turn off the power before changing a light bulb

Terra Spot 

Safety Information EU/USA

Summary of Contents for Terra Spot

Page 1: ... senses Terra Spot Instructions Safety Information EU USA Dimensions Side view Dimensions Top view 12 mm 105mm 4 1 inch Min 135mm Void 5 3 inch 100mm 3 9 inch 41mm 1 6 inch 64mm cut out 2 5 inch Min 135mm Void 5 3 inch Min 12mm 100mm 3 9 inch 41mm 1 6 inch 64mm cut out 2 5 inch ...

Page 2: ...rculation Insulating materials should be 100mm clear of the outside edge of the fitting This lamp is NOT fire rated Any accessory such as firehoods used with this product must be approved by Hand Eye to maintain guarantee Do not use excessive force or power tools on the ceramic components The terracotta is a robust material but if treated incorrectly can be broken Broken ceramics can be sharp Do N...

Page 3: ...ell rubber gasket 8 Terracotta spotlight surround Diagram 1 Lamp components Steps The spot light is supplied in two parts The ceiling fixing attachment and the fully assembled spotlight The light bulb is not supplied and needs to be fitted 1 Installing a GU10 bulb Connect a GU10 LED max 7W LED bulb in to the lamp holder 3 Insert the bulb inside the lamp holder body 6 as shown in diagram 1 Attach t...

Page 4: ...Electrics Prior to installing the spot light connect the lamp to the electrics using the provided junction box 2 Test the light is working prior to inserting in to the ceiling Note Ensure the Mains Power is off when connecting the lamp Use a professional electrician 5 Insert Spot Light Now insert the main body of the spot light through the ceiling attachment ring 1 and push the spot tight up again...

Reviews: