background image

 

Semmelweis Scanner – User Guide v22.03 

29 

 

Other screen information 

 

 

In the case of failed recording, the hand must be 

reinserted. The reasons may be: 

- hand movement during recording, 

- early withdraw of the hand, 
- wrong position of the hand. 

 

 

After logging in with the RFID card, the 

measurement must be started within 2 minutes, 

otherwise the system automatically logs out the user. 

The system logs out after each measurement and the welcome screen reappears. 

Wash your hands with soap and water before returning to work. 

In case of malfunction, reset the device using the On/Off touch button.

 

6.2. Handwash mode 

Using the Semmelweis Scanner in 

Handwash

 mode, can teach you the proper hand washing 

technique. The principle of 

Handwash

 mode is creating artificial contamination on the hands 

via  applying  a  UV-labeled  agent  to  the  entire  surface  of  the  hands  with  GlitterBug  Potion 
(

section 5.3

.) then washing it with soap and warm water following the WHO guidelines. After 

this procedure the effectiveness of hand washing is checked with the Semmelweis Scanner. In 
this  mode,  the  green  areas  on  the  result  images  represent  the  areas  that  have  been  properly 
washed, while the red ones are those from which the special agent, i.e., the dirt, has not been 
properly removed. The hand washing technique is perfect if the result is 100%. 

6.3. Mixed mode 

In 

Mixed

 mode, the device is suitable for both 

Handrub

 and 

Handwash

 mode. 

First apply GlitterBug Potion and check the effectiveness of handrubbing in 

Handrub

 mode. 

Application  of  the  agent  is  appropriate  if  a  completely  green  (100%)  result  is  obtained. 
Otherwise, repeat the application of the special agent until getting a perfect result. Then wash 
your hands with soap and warm water following the WHO guidelines, then use a switch card 
to change the measurement method to 

Handwash

 mode. In this mode, the green areas on the 

result images represent the areas that have been properly washed, while the red ones are those 
from which the special agent, i.e., the dirt, has not been properly removed. The hand washing 
technique is perfect if the result is 100%. 

Summary of Contents for Semmelweis Scanner

















































Reviews: