manualshive.com logo in svg

Hand Held Products Dolphin 7900 Series, User Manual

Share
Download
Hand Held Products Dolphin 7900 Series User Manual Download Page 192

11 - 14

Dolphin® 7900 Series Mobile Computer User’s Guide

Call Log

The Call Log maintains a list of the last 20 calls made or received in each of the following categories:

•           Voice Calls In
•           Voice Calls Out
•           Voice Calls Missed
•           GPRS Data

Voice Call In is the default display whenever the Call Log is opened.

Call Log Options 

Select the option you want to view. To see everything, select All Calls.

Opening the Call Log

You can access the Call Log two ways:

1.  Go to Start > Programs > uPhone > Call Log) OR 

2.  Open the Dialler (go to Tools > Call Log). 

The Call Log opens displaying the last few Voice Calls In; the most recent call always appears at the top. 

This column

Displays the …

Name

The phone number or the name if the call was from or to a matching entry in the Phonebook.

Time

Time and date the call started. This is the local time and date. 

Duration

Duration of the call (hours:minutes:seconds). The clock starts when the call connects, not when 
dialed.

Summary of Contents for Dolphin 7900 Series









































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands