manualshive.com logo in svg

Hand Held Products DOLPHIN 7600, User Manual, Page: 79 / 108

Share
Download
Hand Held Products DOLPHIN 7600 User Manual Download Page 79

Dolphin® 7600 Series User’s Guide 

Rev B

1/17/2007

8 - 1

8

Bluetooth Manager

Overview

Each Dolphin 7600 contains a Bluetooth radio whose driver installs each time the device boots up.

Enabling the Bluetooth Radio

Single-tap the Bluetooth icon in the command bar 

 or

Tap 

Start

 > 

Programs

 > 

Bluetooth Manager

 and tap the 

ON

 button to activate the Bluetooth radio.

Use the left and right arrows in the upper right corner to scroll through the tab windows. 

Tab Window

Description

See Page

Setting Tab

Enables and disables the Bluetooth radio.

8-2

BT Service Tab

•

Scans for Bluetooth services on other devices (see page 

8-8)

.

•

Transfers files via infrared (see page 

6-7)

.

8-2

Serial Port Tab

Manages the registration of serial ports, both client and server ports.

8-3

About

Displays information about the Bluetooth Manager software.

N/A

Summary of Contents for DOLPHIN 7600













































































































Reviews:

No comments